Products - All
Showing 13–24 of 65 results
-
OmegaCrete
Vertical Concrete Finish Coat
OmegaCrete is a premium, one component, polymer-modified cementitious coating designed to create a smooth finish on poured-in-place, tilt-up, precast, or other concrete surfaces. Specially formulated to be easily applied over these porous substrates, OmegaCrete will cure to become an integral part of the wall while maintaining the wall’s durability and breathability. OmegaCrete is an excellent choice to cover bugholes, honeycombs, and other small imperfections in concrete surfaces to produce a clean, uniform, smooth appearance.
Product Page | Product Data Sheet | SDS | Flyer -
OmegaCoat Cementitious Fog Coat
Cementitious Fog Coat
OmegaCoat (Fog Coat) is a spray-applied cement-based, water-soluble, pigmented coating, which cures to become an integral part of the stucco surface and maintains original finish characteristics. It is an economical method to achieve color uniformity and to enhance or refresh the appearance of existing stucco.
Product Page | Product Data Sheet | SDS -
ColorPak
Blended Dry Pigments for Coloring ColorTek Exterior Stucco
ColorPak is a dry blended formulation of iron oxide pigments used to color ColorTek Stucco or other approved Omega products.
Product Page | Product Data Sheet | SDS -
Diamond Wall Sanded
Cementitious, Fiber-reinforced, Sanded, Stucco Base
Diamond Wall Sanded is the base coat for the Diamond Wall One Coat and Three Coat Stucco Systems. DW Sanded is a factory prepared blend of portland cement complying with ASTM C150, chopped fibers, proprietary ingredients, and sand that is mixed with water and an optional admix.
Product Page |Product Data Sheet | SDS -
Diamond Wall Concentrate
Cementitious Fiber-reinforced Stucco Base
Diamond Wall Concentrate (DWC) is the base coat for the Diamond Wall One Coat and Three Coat Stucco Systems. DWC is a factory prepared blend of portland cement complying with ASTM C150, chopped fibers, and proprietary ingredients field mixed with sand, water, and an optional admix.
Product Page | Product Data Sheet | SDS -
Diamond Wall Pro
Premium Cementitious, Fiber-reinforced, Polymer-modified Base Coat
The Diamond Wall Pro System offers an upgrade to current one coat stucco systems by providing improved crack resistance, flexural and tensile strength, and impact resistance. Diamond Wall Pro is a factory prepared blend of approved cement, chopped fibers, polymers, and other proprietary ingredients that comes in both Sanded and Concentrate versions.
-
Super Cement
Premium All-purpose Plastering Cement
Super Cement is a mixture of portland cement complying with ASTM C150 and proprietary ingredients that increase the workability and early strength of the product. Super Cement is an excellent alternative to plastic cement and meets or exceeds job site requirements for portland cement-based plaster. Super Cement is available either as fibered or non-fibered.
Product Page | Product Data Sheet | SDS | Flyer -
Super Cement Sanded
Sanded Portland Cement-based Scratch and Brown Plaster
Super Cement Sanded Scratch and Brown is a mixture of portland cement complying with ASTM C150, sand, and proprietary ingredients that increase the workability and early strength of the product. Super Cement Sanded is an excellent alternative to field mixed portland cement-based scratch and brown plaster. Super Cement Sanded is available either as fibered or non-fibered.
Product Page | Product Data Sheet | SDS | Flyer -
FoamTek
Polymer-modified Cementitious Adhesive and Base Coat
FoamTek is a dry blend, polymer-modified, portland cement-based material specifically formulated for coating and attaching architectural EPS foam shapes to approved substrates. It is available in FoamTek 60 (fine), FoamTek 30 (medium), FoamTek 20 (med-coarse), or FoamTek 16 (coarse). NOTE: Not for use with EIF Systems.
Product Page | Product Data Sheet | SDS -
CI-Base
Polymer-Modified Cementitious Base Coat
CI-Base (Crack Isolation Base) is a dry blend, polymer-modified, portland cement-based material specifically formulated as base coat for embedding mesh in the Omega Crack Isolation System (CIS). NOTE: Not for use with EIF Systems.
Product Page | Product Data Sheet | SDS -
DryBond
Polymer-modified Cement Adhesive and Base Coat
DryBond is a dry blend, polymer-modified cement that when mixed with water at the job used as an adhesive and base coat for EPS foam shapes. Additionally, it may be used in the Omega Crack Isolation System and as a leveling coat over approved substrates.
Product Page | Product Data Sheet | SDS -
StyroGlue Drybond
Premium Polymer-modified, Cement Adhesive and Base Coat
StyroGlue DryBond is a premium, dry blend, portland cement-based, polymer-modified base coat and adhesive, which is field mixed with water. StyroGlue DryBond may be used as an adhesive and base coat for AkroFlex EIF Systems and EPS foam shapes. Additionally, it may be used as a leveling coat over approved substrates.
Product Page | Product Data Sheet |SDS
