ColorTek PM (Polymer-modified) portland cement-based, stucco finish is a premium, factory blended, polymer-modified. ColorTek PM has improved tensile, bond, and flexural strengths and can be applied over polymer-modified base coats without the addition of admixes or bonders. It is available in the full range of standard ColorTek aggregate and base combinations; see the appropriate ColorTek product data sheet for additional information.
ColorTek is intended for use as a decorative, low-cost, low-maintenance finish. It can be used directly over polymer-modified base coats.
1. One coat stucco 2. Brown coat 3. Existing Stucco 4. CMU/poured-in-place and/or tilt-up concrete/masonry 5. Approved Omega base coats and/or cementitious finishes