StyroBond Adhesive

Product Description

StyroBond Adhesive is a non-cementitious, 100% acrylic adhesive designed to bond EPS foam to various approved substrates including wood-based sheathing. It does not require the addition of portland cement, which reduces the labor costs during application.

Basic Uses

StyroBond Adhesive is used to adhere Expanded Polystyrene (EPS) Insulation Board to various porous approved substrates including wood substrates in AkroFlex EIF Systems.
NOTE: Not for use in adhering EPS to EPS.

1. Wood-based or OSB sheathing 2. Paper-faced gypsum sheathing 3. Fiberglass mat-faced gypsum sheathing 4. Cement backer board 5. Masonry 6. Poured-in-place and/or tilt-up concrete 7. Other approved cementitious substrates

Downloadable Files

Product Data Sheet | SDS

Related products

  • Read more

    ColorTek Exterior Stucco

    Portland Cement Stucco Finish

    ColorTek is a premium, factory blended, portland cement-based, stucco finish manufactured from the highest-grade Portland cement, hydrated lime, graded aggregates, and specific additives. ColorTek comes in various aggregate combinations that allow design flexibility and a variety of finish textures.

    The following aggregate combinations are available:
    ♦ Coarse: Used to create heavy laced, sand, or machine dash finishes.
    ♦ 16/20: Used to create traditional, sand, or machine dash finishes.
    ♦ 20/30: Used to create a fine texture or sand finishes.
    ♦ 30/30: Used to create a uniform fine sand finishes.

    ColorTek comes in the following bases:
    ♦ Base 2 (grey)
    ♦ Base 10 (white)
    ♦ Base 1 (white/grey)
    ♦ Base 5 (dark grey)

    ColorTek may be colored in the field using the Omega ColorPak system. Alternatively, ColorTek is offered as a factory mixed colored stucco. Minimum quantities may apply when ordering factory blended products.
    Product Page | Product Data Sheet | SDS

  • Read more

    ColorPak

    Blended Dry Pigments for Coloring ColorTek Exterior Stucco

    ColorPak is a dry blended formulation of iron oxide pigments used to color ColorTek Stucco or other approved Omega products.
    Product Page | Product Data Sheet | SDS

  • Read more

    StyroGlue TF Base

    Non-Cementitious, Fiber-reinforced, Tintable Base Coat

    StyroGlue TF Base is a 100% acrylic, water-based, fibered, non-cementitious base coat manufactured to be flexible and crack resistant. It eliminates the mixing and labor of working with portland cement base coats. The base coat can be tinted to the approximate color of the finish.
    Product Page | Product Data Sheet | SDS

  • Read more

    FoamTek

    Polymer-modified Cementitious Adhesive and Base Coat

    FoamTek is a dry blend, polymer-modified, portland cement-based material specifically formulated for coating and attaching architectural EPS foam shapes to approved substrates. It is available in FoamTek 60 (fine), FoamTek 30 (medium), FoamTek 20 (med-coarse), or FoamTek 16 (coarse). NOTE: Not for use with EIF Systems.
    Product Page | Product Data Sheet | SDS