PolyLoc (PVA Bonder)

Product Description

PolyLoc is a poly-vinyl acetate (PVA) based bonder or admixture for cementitious or gypsum plaster products. PolyLoc can be used in bonding new cement-based or gypsum-based products to a variety of existing, properly prepared substrates and as an admixture to increase tensile, bond, and flexural strength of approved products.

Basic Uses

PolyLoc improves the adhesion between cementitious or gypsum plaster products and difficult to bond to substrates. Also, PolyLoc may be used as an admixture to improve performance of approved products.

1. One coat products, plaster brown coats, and stucco 2. CMU, poured-in-place and/or tilt-up concrete, masonry 3. Approved Omega base coats 4. Approved cement-based products 5. Acrylic or water-based paints 6. Gypsum drywall and gypsum-based plasters 7. Acrylic or water-based paints 8. Mortar setting beds, grout As an admix in: 1. Approved cement-based products 2. Liquid component in a sand/cement slurry coat NOTE: Contact an Omega representative for use in other products.

Downloadable Files

Product Data Sheet | SDS | Brochure