AkroLastic ProPlus Finishes

Product Description

AkroLastic ProPlus Finishes are 100% acrylic-based, elastomeric, textured finishes that use the latest Dirt Pick-Up Resistance (DPR) technology. They provide improved elasticity, weather resistance, and stain resistance than standard acrylic finishes. AkroLastic ProPlus Finishes help bridge the hairline structural and shrinkage cracks inherent in traditional portland cement-based plaster construction.

AkroLastic ProPlus Finishes are available in the following textures:

♦ Coarse (~1.5mm): For Heavy Sand-like Finishes.
♦ Medium (~0.8mm): For Medium Sand-like Finishes.
♦ Fine (~0.3mm): For Imperfect Smooth Type Finishes.

Basic Uses

AkroLastic ProPlus Finishes are designed to be used with the AkroFlex EIF Systems and also as an interior or exterior finish.

1. AkroFlex EIF System base coats 2. One coat stucco/brown coat/stucco 3. All Omega base coats 4. CMU/poured-in-place and/or tilt-up concrete/masonry 5. Properly prepared gypsum dry wall (interior) 6. Other substrates as approved by Omega Products International

Standard Colors | Textures | Photo Gallery

Downloadable Files

Product Data Sheet | SDS

Related products

  • Read more

    RapidPrime

    Acrylic Priming Agent (formerly OmegaFlex Primer)

    Omega RapidPrime is formulated for use as a priming agent under all Omega textured finishes, coatings, and similar products to promote bond strength, color consistency, and uniform suction, while increasing water-resistance and finish coverage. It offers excellent efflorescence and alkali resistance on cement-based surfaced with a pH up to 13, such as new stucco, concrete, and masonry.
    Product Page | Product Data Sheet | SDS

  • Read more

    ColorTek Exterior Stucco

    Portland Cement Stucco Finish

    ColorTek is a premium, factory blended, portland cement-based, stucco finish manufactured from the highest-grade Portland cement, hydrated lime, graded aggregates, and specific additives. ColorTek comes in various aggregate combinations that allow design flexibility and a variety of finish textures.

    The following aggregate combinations are available:
    ♦ Coarse: Used to create heavy laced, sand, or machine dash finishes.
    ♦ 16/20: Used to create traditional, sand, or machine dash finishes.
    ♦ 20/30: Used to create a fine texture or sand finishes.
    ♦ 30/30: Used to create a uniform fine sand finishes.

    ColorTek comes in the following bases:
    ♦ Base 2 (grey)
    ♦ Base 10 (white)
    ♦ Base 1 (white/grey)
    ♦ Base 5 (dark grey)

    ColorTek may be colored in the field using the Omega ColorPak system. Alternatively, ColorTek is offered as a factory mixed colored stucco. Minimum quantities may apply when ordering factory blended products.
    Product Page | Product Data Sheet | SDS

  • Read more

    SuperFog

    A Premium Fog Coat

    SuperFog (Fog Coat) is a premium coating designed to achieve color uniformity or to refresh the appearance of existing stucco or other porous substrates. Unlike paint, SuperFog helps to retain the surface’s natural appearance and properties. Though unlike standard cement-based fog coats, SuperFog is not at risk of efflorescing or having blotchy color.
    Product Page | Product Data Sheet | SDS

  • Read more

    OmegaCoat Plus

    A Premium, Polyer-modified, Cementitious Fog Coat

    OmegaCoat Plus (Fog Coat) is a spray-applied, polymer-modified, pigmented, cement-based coating, which cures to become an integral part of the stucco surface and maintains the original finish characteristics. When compared to standard fog coat, OmegaCoat Plus has improved adhesion and water-resistance, while reducing the likelihood of color streaking and efflorescence. When compared to paint, OmegaCoat Plus is longer-lasting, more durable, and more permiable. Fog coating is an economical method to achieve color uniformity and to enhance or refresh the appearance of existing, unpainted, cementitious stucco.
    Product Page | Product Data Sheet | SDS