ColorTek is a premium, factory blended, portland cement-based, stucco finish manufactured from the highest-grade Portland cement, hydrated lime, graded aggregates, and specific additives. ColorTek comes in various aggregate combinations that allow design flexibility and a variety of finish textures.
The following aggregate combinations are available:
♦ Coarse: For heavy laced, sand, or machine dash finishes.
♦ 16/20: For traditional, sand, or machine dash finishes.
♦ 20/30: For a fine texture or sand finishes.
♦ 30/30: For a uniform fine sand finishes.
ColorTek comes in the following bases:
♦ Base 2 (grey)
♦ Base 10 (white)
♦ Base 1 (white/grey)
♦ Base 5 (dark grey)
ColorTek may be colored in the field using the Omega ColorPak system. For added convenience, ColorTek is also offered as a factory mixed colored stucco. Minimum quantities may apply when ordering factory blended products.
ColorTek is intended for use as a decorative, low-cost, low-maintenance finish.
1. One coat stucco 2. Brown coat 3. Existing Stucco 4. CMU/poured-in-place and/or tilt-up concrete/masonry 5. Approved Omega base coats and/or cementitious finishes