AkroFill

Product Description

AkroFill is a non-cementitious, ready-mixed, flexible joint compound that is manufactured with high-grade fiber fillers and 100% acrylic polymers.  When reinforced with AkroFlex Starter Mesh, AkroFill is used to treat joints, corners, rough openings, and other transitions within the AkroGuard Water-Resistive Air Barrier Assembly.

Basic Uses

AkroFill is a trowel applied, flexible joint compound designed to bridge sheathing joints and rough openings when used in conjunction with embedded AkroFlex Starter Mesh. When used with AkroGuard, it creates a weather-resistive barrier within the AkroFlex EIF Systems or over approved substrates.

1. Gypsum sheathing 2. Fiber faced gypsum sheathing 3. Wood-based sheathing 4. CMU/poured-in-place and/or tilt-up concrete/masonry 5. Cement board

Downloadable Files

Product Data Sheet | SDS

Related products

  • Read more

    Travertino

    Cementitious Decorative Finish

    Travertino is a cementitious interior/exterior finish manufactured with integral color and a mixture of various size aggregates designed to achieve a variety of sedimentary stone appearances, such as travertine, limestone, and sandstone. Travertino can create a pitted look like that of classic Tuscan stone or can be troweled/ground to achieve a smooth stone appearance. Designs can also be carved into Travertino during application and can be used to cast special shapes. Travertino an excellent choice to create a beautiful, warm sedimentary stone appearance with a lower cost, lower weight, and shorter lead time than real stone.
    Product Page | Product Data Sheet | SDS
  • Read more

    AkroGuard Fabric

    Polyester Reinforced Fabric

    AkroGuard Fabric is a reinforced, non-woven polyester fabric that is specially designed for use in the AkroGuard Water-Resistive Air Barrier (WR-AB) Assembly. When fully embedded in AkroGuard coating, the AkroGuard Fabric treats and reinforces joints, corners, rough openings, and other transitions within the AkroGuard WB-AB Assembly.
    Product Page |Product Data Sheet | MSDS

  • Read more

    PolyLoc (PVA Bonder)

    Poly-vinyl Acetate Bonding Agent or Admixture

    PolyLoc is a poly-vinyl acetate (PVA) based bonder or admixture for cementitious or gypsum plaster products. PolyLoc can be used in bonding new cement-based or gypsum-based products to a variety of existing, properly prepared substrates and as an admixture to increase tensile, bond, and flexural strength of approved products.
    Product Page | Product Data Sheet | SDS | Brochure

  • Read more

    AkroLoc (Acrylic Bonder),

    Acrylic Bonding Agent or Admixture

    AkroLoc is a 100% acrylic polymer bonder or admixture for cementitious products. AkroLoc can be used in bonding new cement-based products to a variety of existing properly prepared substrates and as an admixture to reduce cracking and increase tensile, bond, and flexural strength of approved products.
    Product Page | Product Data Sheet |SDS | Brochure