AkroGuard Fabric

Product Description

AkroGuard Fabric is a reinforced, non-woven polyester fabric that is specially designed for use in the AkroGuard Water-Resistive Air Barrier (WR-AB) Assembly. When fully embedded in AkroGuard coating, the AkroGuard Fabric treats and reinforces joints, corners, rough openings, and other transitions within the AkroGuard WB-AB Assembly.

Basic Uses

AkroGuard Fabric is designed to be embedded with AkroGuard coating to treat joints, corners, rough openings, penetrations, and other transitions in the AkroGuard WR-AB Assembly.

Downloadable Files

Product Data Sheet | MSDS

Related products

  • Read more

    AkroLoc (Acrylic Bonder),

    Acrylic Bonding Agent or Admixture

    AkroLoc is a 100% acrylic polymer bonder or admixture for cementitious products. AkroLoc can be used in bonding new cement-based products to a variety of existing properly prepared substrates and as an admixture to reduce cracking and increase tensile, bond, and flexural strength of approved products.
    Product Page | Product Data Sheet |SDS | Brochure

  • Read more

    ColorTek SmoothCoat Exterior Stucco

    Portland Cement Stucco Finish

    ColorTek SmoothCoat is a premium, factory blended, portland cement-based stucco finish used to create a smooth Santa Barbara or Mission type finish. It is manufactured from the highest-grade portland cement, hydrated lime, graded aggregates, and specific additives.

    SmoothCoat comes in the following bases:
    ♦ Base 2 (grey)
    ♦ Base 10 (white)
    ♦ Base 1 (white/grey)
    ♦ Base 5 (dark grey)

    SmoothCoat may be colored in the field using the Omega ColorPak system. For added convenience, SmoothCoat is also offered as a factory mixed colored stucco. Minimum quantities may apply when ordering factory blended products.
    Product Page | Product Data Sheet | SDS

  • Read more

    PolyLoc (PVA Bonder)

    Poly-vinyl Acetate Bonding Agent or Admixture

    PolyLoc is a poly-vinyl acetate (PVA) based bonder or admixture for cementitious or gypsum plaster products. PolyLoc can be used in bonding new cement-based or gypsum-based products to a variety of existing, properly prepared substrates and as an admixture to increase tensile, bond, and flexural strength of approved products.
    Product Page | Product Data Sheet | SDS | Brochure

  • Read more

    OmegaGuard (Water Repellent)

    Silicon-based Sealer

    OmegaGuard is a silicon-based, clear, non-yellowing water repellent designed to seal porous, cement-based substrates such as stucco, brick, masonry, and other concrete surfaces. When properly applied, OmegaGuard will offer long lasting protection from the elements while retaining the surface’s natural appearance and vapor permeability.
    Product Page | Product Data Sheet | SDS | Brochure