Omega Reinforcing Mesh

Product Description

Omega Reinforcing Meshes are alkali resistant, woven glass fiber fabrics specially designed to be used with Omega base coats. Meshes are available in a range of weights that provide different levels of strength and impact resistance. NOTE: DO NOT use Omega Reinforcing Meshes in AkroFlex EIF Systems. Use only AkroFlex Reinforcing Mesh in EIF Systems.

The following Omega Reinforcing Meshes are available:
♦ CI-Mesh Standard Mesh (4.5oz): Omega Crack Isolation (CI) mesh is designed for use in the Omega Crack Isolation System and architectural foam shapes.
♦ CI-Mesh Starter Mesh: For back wrapping and detail work.
♦ Detail Mesh (2oz): For use with foam shapes. Not for use with EIF Systems.

Basic Uses

Omega Reinforcing Meshes are designed to reduce surface cracking as part of the Omega Crack Isolation System, for adding impact resistance over architectural foam shapes, or for adding strength when used with approved Omega base coats.

1. Omega Crack Isolation System 2. Architectural foam shapes 3. All Omega base coats

NOTE: Weights are ±10%.

Downloadable Files

Product Data Sheet | SDS

Related products

  • Read more

    StyroGlue Drybond

    Premium Polymer-modified, Cement Adhesive and Base Coat

    StyroGlue DryBond is a premium, dry blend, portland cement-based, polymer-modified base coat and adhesive, which is field mixed with water. StyroGlue DryBond may be used as an adhesive and base coat for AkroFlex EIF Systems and EPS foam shapes. Additionally, it may be used as a leveling coat over approved substrates.
    Product Page | Product Data Sheet |SDS

  • Read more

    AkroFlex Reinforcing

     Mesh Alkali-resistant Woven Fiber Mesh

    AkroFlex Reinforcing Meshes are alkali resistant, woven glass fiber fabrics specially designed to be used with AkroFlex EIF Systems and other approved Omega base coats. Meshes are available in a range of weights that provide different levels of strength and impact resistance.

    The following Reinforcing Meshes are available:
    ♦ Ultra Heavy Duty Mesh (20 oz): For locations needing the highest impact resistance, such as ground floors and high traffic areas.
    ♦ Heavy Duty Mesh (15 oz): For locations needing high impact resistance, such as ground floors and other higher traffic areas.
    ♦ Intermediate Mesh (11.5 oz): For locations needing additional impact resistance, such as medium traffic areas.
    ♦ Standard Mesh (4.2 oz): For locations needing standard impact resistance, such as second stories or other low traffic areas where impact is unlikely.
    ♦ Starter Mesh (4.2 oz.): For back wrapping and detail work.
    Product Page | Product Data Sheet | SDS

  • Read more

    ColorTek Exterior Stucco

    Portland Cement Stucco Finish

    ColorTek is a premium, factory blended, portland cement-based, stucco finish manufactured from the highest-grade Portland cement, hydrated lime, graded aggregates, and specific additives. ColorTek comes in various aggregate combinations that allow design flexibility and a variety of finish textures.

    The following aggregate combinations are available:
    ♦ Coarse: Used to create heavy laced, sand, or machine dash finishes.
    ♦ 16/20: Used to create traditional, sand, or machine dash finishes.
    ♦ 20/30: Used to create a fine texture or sand finishes.
    ♦ 30/30: Used to create a uniform fine sand finishes.

    ColorTek comes in the following bases:
    ♦ Base 2 (grey)
    ♦ Base 10 (white)
    ♦ Base 1 (white/grey)
    ♦ Base 5 (dark grey)

    ColorTek may be colored in the field using the Omega ColorPak system. Alternatively, ColorTek is offered as a factory mixed colored stucco. Minimum quantities may apply when ordering factory blended products.
    Product Page | Product Data Sheet | SDS

  • Read more

    Exterior E-Z Wall

    Portland Cement Stucco Finish

    Exterior E-Z Wall is a premium, factory blended, cement-based, polymer-modified, stucco finish manufactured from portland cement complying with ASTM C150, graded aggregates, and proprietary additives. Exterior E-Z Wall is used to create a paint ready surface in a textured, sand, or machine dash finish.
    Product Page | Product Data Sheet | SDS