CI-Base

Product Description

CI-Base (Crack Isolation Base) is a dry blend, polymer-modified, portland cement-based material specifically formulated as base coat for embedding mesh in the Omega Crack Isolation System (CIS). NOTE: Not for use with EIF Systems.

Basic Uses

CI-Base is a base coat for the Omega Crack Isolation System. It may be used as a leveling or patching material over approved substrates.
NOTE: Not for use with EIF Systems.

1. One coat stucco 2. Brown coat 3. Masonry 4. Poured-in-place and/or tilt-up concrete

Downloadable Files

Product Data Sheet | SDS

Related products

  • Read more

    FoamTek

    Polymer-modified Cementitious Adhesive and Base Coat

    FoamTek is a dry blend, polymer-modified, portland cement-based material specifically formulated for coating and attaching architectural EPS foam shapes to approved substrates. It is available in FoamTek 60 (fine), FoamTek 30 (medium), FoamTek 20 (med-coarse), or FoamTek 16 (coarse). NOTE: Not for use with EIF Systems.
    Product Page | Product Data Sheet | SDS

  • Read more

    ColorPak

    Blended Dry Pigments for Coloring ColorTek Exterior Stucco

    ColorPak is a dry blended formulation of iron oxide pigments used to color ColorTek Stucco or other approved Omega products.
    Product Page | Product Data Sheet | SDS

  • Read more

    StyroBond Adhesive

    Non-cementitious, 100% Acrylic EPS Insulation Board Adhesive

    StyroBond Adhesive is a non-cementitious, 100% acrylic adhesive designed to bond EPS foam to various approved substrates including wood-based sheathing. It does not require the addition of portland cement, which reduces the labor costs during application.
    Product Page | Product Data Sheet | SDS

  • Read more

    StyroGlue Plus Base

    Acrylic-based, Water-Resistant Adhesive and Base Coat

    StyroGlue Plus Base is a 100% polymer-based, fiber reinforced, water-resistant base coat and adhesive, which is field mixed in a 1:1 ratio by weight with portland cement meeting ASTM C150. StyroGlue Plus may be used as an adhesive and base coat for AkroFlex EIF Systems and EPS foam shapes. StyroGlue Plus is highly water-resistant and can be used as a secondary water barrier.
    Product Page | Product Data Sheet | SDS