Exterior 2N1 Patch is a fast setting, non-shrinking, portland cement-based material, which will limit the time spent in patching damage that may occur in exterior walls and/or stucco finishes.
Exterior 2N1 Patch is to be used as a patching material for the upkeep and maintenance of approved cementitious wall assemblies in preparation for Omega finish coats.
OmegaCure is a non-corrosive, liquid admixture for accelerating the hydration of portland cement-based materials. A more advanced hydration state will result in higher early strength, faster hardening, higher abrasion resistance, reduced void content, and decreased water movement within the cement matrix.
Product Page | Product Data Sheet | SDS | Brochure | Flyer
BondCrete is a liquid bonding agent composed of a polyvinyl acetate homopolymer resin. Used to bond new portland cement-based and gypsum plaster products to existing properly prepared cement-based substrates.
Product Page | Product Data Sheet | SDS | Brochure
ColorTek SmoothCoat is a premium, factory blended, portland cement-based stucco finish used to create a smooth Santa Barbara or Mission type finish. It is manufactured from the highest-grade portland cement, hydrated lime, graded aggregates, and specific additives.
SmoothCoat comes in the following bases:
♦ Base 2 (grey)
♦ Base 10 (white)
♦ Base 1 (white/grey)
♦ Base 5 (dark grey)
SmoothCoat may be colored in the field using the Omega ColorPak system. For added convenience, SmoothCoat is also offered as a factory mixed colored stucco. Minimum quantities may apply when ordering factory blended products.
Product Page | Product Data Sheet | SDS
