OmegaSeal 1000 (Penetrating Sealer)

Product Description

OmegaSeal 1000 is an acrylic-based, clear, non-yellowing sealer for use over a variety substrates, including stucco, acrylic finishes, masonry, and other concrete surfaces. When properly applied, OmegaSeal 1000 forms a continuous protective film over the substrate’s surface to offer long lasting protection from the elements.

Basic Uses

OmegaSeal 1000 is designed for use as a weather-resistant sealer for a variety of substrates.

1. Stucco 2. Masonry 3. Poured-in-place and/or Tilt-up concrete 4. Cementitious surfaces 5. Approved interior products 6. Porous tile, brick, stone, and slate 7. Acrylic-based finishes and coatings

Downloadable Files

Product Data Sheet | SDS | Brochure

Related products

  • Read more

    Travertino

    Cementitious Decorative Finish

    Travertino is a cementitious interior/exterior finish manufactured with integral color and a mixture of various size aggregates designed to achieve a variety of sedimentary stone appearances, such as travertine, limestone, and sandstone. Travertino can create a pitted look like that of classic Tuscan stone or can be troweled/ground to achieve a smooth stone appearance. Designs can also be carved into Travertino during application and can be used to cast special shapes. Travertino an excellent choice to create a beautiful, warm sedimentary stone appearance with a lower cost, lower weight, and shorter lead time than real stone.
    Product Page | Product Data Sheet | SDS
  • Read more

    OmegaFlex

    100% Acrylic Interior/Exterior Finishes

    OmegaFlex Finishes are 100% acrylic-based finishes using the latest Dirt Pick-up Resistance (DPR) technology. They provide a flexible, durable, integrally colored finish, which will enhance the appearance of any plastered structure. OmegaFlex Finishes may be sprayed or troweled to achieve a variety of texture options.

    OmegaFlex Finishes are available in the following textures:
    ♦ Coarse (~1.5mm): For Heavy Sand-like Finishes.
    ♦ Medium (~0.8mm): For Medium Sand-like Finishes.
    ♦ Fine (~0.3mm): For Imperfect Smooth Type Finishes. Ideal for AkroTique.
    Product Page | Product Data Sheet | SDS

  • Read more

    AquaShield

    Water Repellant Admix for Stucco and Mortar

    AquaShield is a powdered admixture designed to increase the water-resistance of ColorTek Stucco, mortar, or other approved cementitious products. AquaShield is added during mixing and offers the benefits of long-lasting water-resistance without the extra time and expense of applying a sealer.
    Product Page | Product Data Sheet | SDS | Brochure

  • Read more

    ColorTek Paint Grade Exterior Stucco

    Paintable Portland Cement Stucco Finish

    ColorTek Paint Grade (PG) Exterior Stucco is a premium, factory blended, Portland cement-based, stucco finish manufactured from the highest-grade Portland cement, hydrated lime, graded aggregates, and specific additives. ColorTek PG comes in various aggregate combinations that allow design flexibility and a variety of finish textures.

    The following aggregate combinations are available:
    ♦ Coarse: For heavy laced, sand, or machine dash finishes.
    ♦ 16/20: For traditional, sand, or machine dash finishes.
    ♦ 20/30: For fine texture or sand finishes.
    ♦ 30/30: For uniform fine sand finishes.

    ColorTek PG is designed to be painted and cannot be used with the ColorPak coloring system. It comes in the following grades:
    ♦ Premium Paint Grade
    ♦ Paint Grade
    Product Page | Product Data Sheet | SDS