StyroGlue TF Base

Product Description

StyroGlue TF Base is a 100% acrylic, water-based, fibered, non-cementitious base coat manufactured to be flexible and crack resistant. It eliminates the mixing and labor of working with portland cement base coats. The base coat can be tinted to the approximate color of the finish.

Basic Uses

StyroGlue TF Base is designed for use as a base coat in the AkroFlex EIF Systems and the AkroGold DEF System. It can be used as a skim coat over existing acrylic finishes.
NOTE: StyroGlue TF Base is not designed for use as an adhesive.

1. EPS foam board 2. Fiberglass mat-faced gypsum sheathing or cement board 3. EPS foam shapes As a skim coat over: 1. Acrylic finishes

Downloadable Files

Product Data Sheet | SDS

Related products

  • Read more

    StyroAdmix

    Acrylic Adhesive and Base Coat Admix

    StyroAdmix is a 100% acrylic admix that is field mixed with Omega’s acrylic finishes and portland cement to create an adhesive and base coat. StyroAdmix saves contractors money, by allowing them to create an economical base coat and/or adhesive from leftover AkroFlex or OmegaFlex finishes. This base coat/adhesive can be used to coat and attach EPS foam shapes or as leveling coat over approved substrates.
    Product Page |Product Data Sheet  | SDS

  • Read more

    DryBond

    Polymer-modified Cement Adhesive and Base Coat

    DryBond is a dry blend, polymer-modified cement that when mixed with water at the job used as an adhesive and base coat for EPS foam shapes. Additionally, it may be used in the Omega Crack Isolation System and as a leveling coat over approved substrates.
    Product Page | Product Data Sheet | SDS

  • Read more

    Diamond Wall Sanded

    Cementitious, Fiber-reinforced, Sanded, Stucco Base

    Diamond Wall Sanded is the base coat for the Diamond Wall One Coat and Three Coat Stucco Systems. DW Sanded is a factory prepared blend of portland cement complying with ASTM C150, chopped fibers, proprietary ingredients, and sand that is mixed with water and an optional admix.
    Product Page |Product Data Sheet | SDS

  • Read more

    StyroGlue Drybond

    Premium Polymer-modified, Cement Adhesive and Base Coat

    StyroGlue DryBond is a premium, dry blend, portland cement-based, polymer-modified base coat and adhesive, which is field mixed with water. StyroGlue DryBond may be used as an adhesive and base coat for AkroFlex EIF Systems and EPS foam shapes. Additionally, it may be used as a leveling coat over approved substrates.
    Product Page | Product Data Sheet |SDS