Polyester Reinforced Fabric

AkroGuard Fabric is a reinforced, non-woven polyester fabric that is specially designed for use in the AkroGuard Water-Resistive Air Barrier (WR-AB) Assembly. When fully embedded in AkroGuard coating, the AkroGuard Fabric treats and reinforces joints, corners, rough openings, and other transitions within the AkroGuard WB-AB Assembly.
Product Page |Product Data Sheet | MSDS

The post AkroGuard Fabric first appeared on Omega Products International.

The post AkroGuard Fabric appeared first on Omega Products International.

Alkali Resistant, Woven Fiber Mesh

Omega Reinforcing Meshes are alkali resistant, woven glass fiber fabrics specially designed to be used with Omega base coats. Meshes are available in a range of weights that provide different levels of strength and impact resistance. NOTE: DO NOT use Omega Reinforcing Meshes in AkroFlex EIF Systems. Use only AkroFlex Reinforcing Mesh in EIF Systems.

The following Omega Reinforcing Meshes are available:
♦ CI-Mesh Standard Mesh (4.5oz): Omega Crack Isolation (CI) mesh is designed for use in the Omega Crack Isolation System and architectural foam shapes.
♦ CI-Mesh Starter Mesh: For back wrapping and detail work.
♦ Detail Mesh (2oz): For use with foam shapes. Not for use with EIF Systems.
Product Page | Product Data Sheet | SDS

The post Omega Reinforcing Mesh first appeared on Omega Products International.

The post Omega Reinforcing Mesh appeared first on Omega Products International.

The post Monomix first appeared on Omega Products International.

The post Monomix appeared first on Omega Products International.

Sanded Portland Cement-based Scratch and Brown Plaster

Super Cement Sanded Scratch and Brown is a mixture of portland cement complying with ASTM C150, sand, and proprietary ingredients that increase the workability and early strength of the product. Super Cement Sanded is an excellent alternative to field mixed portland cement-based scratch and brown plaster. Super Cement Sanded is available either as fibered or non-fibered.
Product Page | Product Data Sheet | SDS | Flyer

The post Super Cement Sanded first appeared on Omega Products International.

The post Super Cement Sanded appeared first on Omega Products International.

Premium All-purpose Plastering Cement

Super Cement is a mixture of portland cement complying with ASTM C150 and proprietary ingredients that increase the workability and early strength of the product. Super Cement is an excellent alternative to plastic cement and meets or exceeds job site requirements for portland cement-based plaster. Super Cement is available either as fibered or non-fibered.
Product Page | Product Data Sheet | SDS | Flyer

The post Super Cement first appeared on Omega Products International.

The post Super Cement appeared first on Omega Products International.

Polymer-Modified Cementitious Base Coat

CI-Base (Crack Isolation Base) is a dry blend, polymer-modified, portland cement-based material specifically formulated as base coat for embedding mesh in the Omega Crack Isolation System (CIS). NOTE: Not for use with EIF Systems.
Product Page | Product Data Sheet | SDS

The post CI-Base first appeared on Omega Products International.

The post CI-Base appeared first on Omega Products International.

Polymer-modified Cementitious Adhesive and Base Coat

FoamTek is a dry blend, polymer-modified, portland cement-based material specifically formulated for coating and attaching architectural EPS foam shapes to approved substrates. It is available in FoamTek 60 (fine), FoamTek 30 (medium), FoamTek 20 (med-coarse), or FoamTek 16 (coarse). NOTE: Not for use with EIF Systems.
Product Page | Product Data Sheet | SDS

The post FoamTek first appeared on Omega Products International.

The post FoamTek appeared first on Omega Products International.

Acrylic-based, Water-Resistant Adhesive and Base Coat

StyroGlue Plus Base is a 100% polymer-based, fiber reinforced, water-resistant base coat and adhesive, which is field mixed in a 1:1 ratio by weight with portland cement meeting ASTM C150. StyroGlue Plus may be used as an adhesive and base coat for AkroFlex EIF Systems and EPS foam shapes. StyroGlue Plus is highly water-resistant and can be used as a secondary water barrier.
Product Page | Product Data Sheet | SDS

The post StyroGlue Plus Base first appeared on Omega Products International.

The post StyroGlue Plus Base appeared first on Omega Products International.

Acrylic-based Adhesive and Base Coat

StyroGlue Base is a 100% polymer-based base coat and adhesive, which is field mixed in a 1:1 ratio, by weight, with portland cement meeting ASTM C150. StyroGlue may be used as an adhesive and base coat for AkroFlex EIF Systems and EPS foam shapes. Additionally, it may be used as a leveling coat over approved substrates.
Product Page | Product Data Sheet | SDS

The post StyroGlue Base first appeared on Omega Products International.

The post StyroGlue Base appeared first on Omega Products International.

Polymer-modified Cement Adhesive and Base Coat

DryBond is a dry blend, polymer-modified cement that when mixed with water at the job used as an adhesive and base coat for EPS foam shapes. Additionally, it may be used in the Omega Crack Isolation System and as a leveling coat over approved substrates.
Product Page | Product Data Sheet | SDS

The post DryBond first appeared on Omega Products International.

The post DryBond appeared first on Omega Products International.