100% Acrylic Sealer

OmegaSeal 1000 is an acrylic-based, clear, non-yellowing sealer for use over a variety substrates, including stucco, acrylic finishes, masonry, and other concrete surfaces. When properly applied, OmegaSeal 1000 forms a continuous protective film over the substrate’s surface to offer long lasting protection from the elements.
Product Page | Product Data Sheet | SDS | Brochure

The post OmegaSeal 1000 (Penetrating Sealer) first appeared on Omega Products International.

The post OmegaSeal 1000 (Penetrating Sealer) appeared first on Omega Products International.

Silicon-based Sealer

OmegaGuard is a silicon-based, clear, non-yellowing water repellent designed to seal porous, cement-based substrates such as stucco, brick, masonry, and other concrete surfaces. When properly applied, OmegaGuard will offer long lasting protection from the elements while retaining the surface’s natural appearance and vapor permeability.
Product Page | Product Data Sheet | SDS | Brochure

The post OmegaGuard (Water Repellent) first appeared on Omega Products International.

The post OmegaGuard (Water Repellent) appeared first on Omega Products International.

Efflorescence Reducing Admixture

E-FX Admix is designed to help reduce efflorescence and improve the performance in approved cement-based stucco products. When added to the material, E-FX Admix will offer long lasting protection from the elements while retaining the surface’s natural appearance and vapor permeability.

Product Page | Product Data Sheet | SDS | Brochure | Flyer

The post E-FX Admix first appeared on Omega Products International.

The post E-FX Admix appeared first on Omega Products International.

Concentrated Cleaner for Stucco Walls and Similar Products

From the leading manufacturer of stucco products, Omega Product’s Stucco Cleaner is designed to dissolve dirt and typical stains from stucco walls and similar products. It is a concentrated, water-based detergent that will penetrate the surface to help remove stains without damaging the finish. Regular cleaning of stucco walls will keep them looking new for many years.
Product Page | Product Data Sheet | SDS |Brochure

The post Stucco Cleaner first appeared on Omega Products International.

The post Stucco Cleaner appeared first on Omega Products International.

Plastic Type Bonding Agent for Cementitious Products

BondCrete is a liquid bonding agent composed of a polyvinyl acetate homopolymer resin. Used to bond new portland cement-based and gypsum plaster products to existing properly prepared cement-based substrates.
Product Page | Product Data Sheet | SDS | Brochure

The post Bondcrete first appeared on Omega Products International.

The post Bondcrete appeared first on Omega Products International.

Acrylic Bonding Agent or Admixture

AkroLoc is a 100% acrylic polymer bonder or admixture for cementitious products. AkroLoc can be used in bonding new cement-based products to a variety of existing properly prepared substrates and as an admixture to reduce cracking and increase tensile, bond, and flexural strength of approved products.
Product Page | Product Data Sheet |SDS | Brochure

The post AkroLoc (Acrylic Bonder), first appeared on Omega Products International.

The post AkroLoc (Acrylic Bonder), appeared first on Omega Products International.

Acrylic Admixture

Admix 500 is a 100% acrylic polymer admixture for cementitious products. Admix 500 is used to increase tensile, bond, and flexural strength of approved products.
Product Page | Product Data Sheet | SDS | Brochure

The post Admix 500 first appeared on Omega Products International.

The post Admix 500 appeared first on Omega Products International.

Poly-vinyl Acetate Bonding Agent or Admixture

PolyLoc is a poly-vinyl acetate (PVA) based bonder or admixture for cementitious or gypsum plaster products. PolyLoc can be used in bonding new cement-based or gypsum-based products to a variety of existing, properly prepared substrates and as an admixture to increase tensile, bond, and flexural strength of approved products.
Product Page | Product Data Sheet | SDS | Brochure

The post PolyLoc (PVA Bonder) first appeared on Omega Products International.

The post PolyLoc (PVA Bonder) appeared first on Omega Products International.

Water Repellant Admix for Stucco and Mortar

AquaShield is a powdered admixture designed to increase the water-resistance of ColorTek Stucco, mortar, or other approved cementitious products. AquaShield is added during mixing and offers the benefits of long-lasting water-resistance without the extra time and expense of applying a sealer.
Product Page | Product Data Sheet | SDS | Brochure

The post AquaShield first appeared on Omega Products International.

The post AquaShield appeared first on Omega Products International.

Accelerator for Cement-based Products

OmegaCure is a non-corrosive, liquid admixture for accelerating the hydration of portland cement-based materials. A more advanced hydration state will result in higher early strength, faster hardening, higher abrasion resistance, reduced void content, and decreased water movement within the cement matrix.
Product Page | Product Data Sheet | SDS | Brochure | Flyer

The post OmegaCure (DWC Accelerator) first appeared on Omega Products International.

The post OmegaCure (DWC Accelerator) appeared first on Omega Products International.