Polymer-modified Portland Cement Stucco Finish

ColorTek PM (Polymer-modified) portland cement-based, stucco finish is a premium, factory blended, polymer-modified. ColorTek PM has improved tensile, bond, and flexural strengths and can be applied over polymer-modified base coats without the addition of admixes or bonders. It is available in the full range of standard ColorTek aggregate and base combinations; see the appropriate ColorTek product data sheet for additional information.

Product Page | Product Data Sheet | SDS

The post ColorTek Polymer-Modified (PM) Exterior Stucco first appeared on Omega Products International.

The post ColorTek Polymer-Modified (PM) Exterior Stucco appeared first on Omega Products International.

Portland Cement Stucco Finish

ColorTek SmoothCoat is a premium, factory blended, portland cement-based stucco finish used to create a smooth Santa Barbara or Mission type finish. It is manufactured from the highest-grade portland cement, hydrated lime, graded aggregates, and specific additives.

SmoothCoat comes in the following bases:
♦ Base 2 (grey)
♦ Base 10 (white)
♦ Base 1 (white/grey)
♦ Base 5 (dark grey)

SmoothCoat may be colored in the field using the Omega ColorPak system. For added convenience, SmoothCoat is also offered as a factory mixed colored stucco. Minimum quantities may apply when ordering factory blended products.
Product Page | Product Data Sheet | SDS

The post ColorTek SmoothCoat Exterior Stucco first appeared on Omega Products International.

The post ColorTek SmoothCoat Exterior Stucco appeared first on Omega Products International.

Portland Cement Stucco Finish

ColorTek is a premium, factory blended, portland cement-based, stucco finish manufactured from the highest-grade Portland cement, hydrated lime, graded aggregates, and specific additives. ColorTek comes in various aggregate combinations that allow design flexibility and a variety of finish textures.

The following aggregate combinations are available:
♦ Coarse: Used to create heavy laced, sand, or machine dash finishes.
♦ 16/20: Used to create traditional, sand, or machine dash finishes.
♦ 20/30: Used to create a fine texture or sand finishes.
♦ 30/30: Used to create a uniform fine sand finishes.

ColorTek comes in the following bases:
♦ Base 2 (grey)
♦ Base 10 (white)
♦ Base 1 (white/grey)
♦ Base 5 (dark grey)

ColorTek may be colored in the field using the Omega ColorPak system. Alternatively, ColorTek is offered as a factory mixed colored stucco. Minimum quantities may apply when ordering factory blended products.
Product Page | Product Data Sheet | SDS

The post ColorTek Exterior Stucco first appeared on Omega Products International.

The post ColorTek Exterior Stucco appeared first on Omega Products International.